瑞利激光雷达探测大气温度算法分析

介绍了瑞利激光雷达的基本结构，描述了使用瑞利散射激光雷达探测平流层和中间层低部大气温度的数据处理方法，构建同时包含标准大气模式温度信息和实际探测背景噪声的模拟数据，对此模拟数据进行背景扣除、平滑去噪、参考点选取等计算分析，探讨提高温度反演精度的实用算法。并应用此数据处理方法对瑞利激光雷达的实际测量数据进行了计算处理，将计算结果与模式CIRJA86、HALOE卫星数据进行对比分析，反演高度30～45km时误差1—3K，45～65km误差大约在2—5K，65—70km误差〈10K。     

A hexane solution deposition of SnS2 films from tetrabutyltin via a solvothermal route at moderate temperature

SnS₂ films have been deposited on glass and alumina plate substrates by the reactions between an organotin precursor [tetrabuyltin, (CH₂CH₂CH₂CH₃)₄Sn] and carbon disulfide in n-hexane at the temperature range 180-200 °C for 10-40 h. The reaction system was oxygen free and applied at a moderate temperature. The films so prepared were characterized by techniques of X-ray diffraction, Scanning electron microscopy, Raman and Mössbauer spectroscopies. The films deposited on glass as well as on alumina plate have an average thickness of 30 μm, but have different rose-like morphologies, which are influenced by both the anisotropic growths of crystals and the different substrate structures. Photoluminescence measurements show that the films have an emission peak at approximately 590 nm.     

基于模型正演的叠前深度偏移

川西龙门山前缘构造非常复杂，逆掩推覆构造带构造形变强烈，构造幅度大，地层倾角陡，断块发育，波场复杂，速度横向变化大，常规叠后时间偏移处理成像效果较差。文章将地震资料模型正演技术应用到叠前深度偏移，探讨了一种有助于川西龙门山前缘逆掩推覆构造地震资料精确成像技术。先利用已有地震资料解释成果，根据地质任务建立二维地质模型，在此基础上进行射线追踪、模拟出单炮地震记录和自激自收剖面，从而对观测系统的最大炮检距、道间距等参数进行论证的一些实用方法，这些方法对地震资料采集具有很好的指导作用；然后根据这些结果，再比较准确地进行叠前深度偏移的初始速度模型建立，从而达到了复杂地表下复杂构造精确成像的目的。     

一种测量天空亮度的新方法

本文介绍了一种测量天空亮度分布的新方法。这种方法利用视场角为180°的鱼眼镜头照相机和计算机数字图像处理系统,实现了天空亮度分布的瞬时测取和胶片密度的高效率处理。文中论述了胶片灰度与天空亮度的标定转换实验方法。引用了误差理论中的数据处理方法确定出二者间的函数关系。通过对昆明和重庆地区晴和阴天空下大量实测结果的误差处论和分析,得到了其相关系数和标准偏差的频数分布图,由此证明了这种方法的可靠性。     

四倍频Nd：YAG激光在高压氢气中的喇曼频移研究

利用Nd:YAG固体激光器四倍频输出(266nm)在高压H₂中的受激喇曼散射获得多波长的激光输出。当泵浦能量一定时,通过改变H₂压力得到了最佳的能量输出,299nm波长的激光能量为3mJ,341nm波长的激光能量输出为6.1mJ,398nm波长的激光能量输出为2.8mJ,239nm波长的激光能量输出为0.8mJ,同时在477nm,595nm,218nm,200nm波段也有能量输出。     

Microfabrication by X‐ray‐induced polymerization above the lower critical solution temperature

A polymer synthesis method is presented in which chain growth driven by exothermic reaction stimulates a gradual chain collapse. The globular precipitates in such systems can be restrained from coalescing by polymerizing in a quiescent environment. Time‐resolved small‐angle scattering study of the methacrylic acid polymerization kinetics in a quiescent system above its lower critical solution temperature (LCST) in water reveals the following features of this method: (a) growing oligomers remain as rigid chains until a critical chain length is reached, at which they undergo chain collapse, (b) radius of gyration increases linearly with time until a critical conversion is reached, and (c) radius of gyration remains constant after the critical conversion, even while conversion is gradually increasing. Following this self‐stabilizing growth mechanism, we show that nanoparticles can be directly synthesized by polymerizing N‐isopropylacrylamide above its LCST in water. The average size of nanoparticles obtained from a polymer–solvent system is expected to be the maximum extent of reaction spread at that monomer concentration. This hypothesis was then verified by polymerizing N‐isopropylacrylamide above their LCST in water, but by initiating the reaction with X‐rays shielded by a mask. The microfabricated patterns conform well to the size and shape of the mask used confirming that the growing chains do not propagate beyond the exposed regions as long as the reaction temperature is maintained above the LCST. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 429–425, 2006     

直接探测测风激光雷达的性能分析

综述了激光雷达大气风场测量的方法，提出了采用直接探测到量三维风场分布的F-P干涉仪方法，简述了测量原理，分析了系统的性能和测量误差，比较了基于分子散射和气溶胶散射的系统测量精度，给出了基于瑞利散射的激光雷达系统方案。     

Optical scattering in beef steak to predict tenderness using hyperspectral imaging in the VIS-NIR region

The objective of this research is to develop a non-destructive method for predicting cooked beef tenderness using optical scattering of light on fresh beef muscle tissue. A hyperspectral imaging system (λ = 496–1,036 nm) that consists of a CCD camera and an imaging spectrograph, was used to acquire beef steak images. The hyperspectral image consisted of 120 bands with spectral intervals of 4.54 nm. Sixty-one fresh beef steaks, including 44 strip loin and 17 tenderloin cuts, were collected. After imaging, the steaks were cooked and Warner-Bratzler shear (WBS) force values were collected as tenderness references. The optical scattering profiles were derived from the hyperspectral images and fitted to the modified Lorentzian function. Parameters, such as the peak height, full scattering width at half maximum (FWHM), and the slope around the FWHM were determined at each wavelength. Stepwise regression was used to identify 7 key wavelengths and parameters. The parameters were then used to predict the WBS scores. The model was able to predict WBS scores with an R = 0.67. Optical scattering implemented with hyperspectral imaging shows limited success for predicting current status of tenderness in beef steak.     

中国海上时移地震技术应用的可行性研究

针对中国海上油田的具体情况，参照国外风险评估方法，进行了一些初步的时移地震可行性研究。总的来说，在中国海上开展时移地震是基本可行的，是必然的发展趋势，但中国海上油田的储层结构和成分比较复杂，因此必须针对不同油田的具体问题，做好各种风险性研究及相应的技术和策略，才能最大限度地降低风险，发挥时移地震技术的效益。     

污染扩散瞬时浓度场测量方法的研究

提出了一种以粒子成像、粒子散射和统计光学为理论基础的污染扩散非定常瞬时浓度场的测量原理，设计了大范围瞬时浓度场测量系统，利用该系统对瞬时扩散的浓度场进行了实际测量，通过数字图像分析和处理得到污染扩散的非定常瞬时浓度场。